Common Problems With Electric Stoves

In the last few decades, the electric stove has gained lots of popularity, becoming the most preferred mode of cooking. Electric stoves consist of at least one or more coiled cooking elements. Electricity is their primary source of power, a factor that makes them extremely convenient cooking devices. What’s more, they are relatively affordable, and their installation is pretty simple. However, despite their versatility, there are always problems that can arise due to their continued application.

The good news is that you can potentially solve most of these issues on your own and avoid the expensive repair costs. For instance, if the burners on your stove cannot heat or even cannot produce light, you can usually solve these issues in a few minutes without straining too much. So what are some of the most common problems that can happen with your electric stove? Peruse through the article and find out.

electric stove troubleshooting

Your electric stove is failing to adjust heating levels.

Most individuals experience this kind of problem occasionally. With time, an electric stove may lose its ability to regulate the amount of heat it produces. You will notice that once a particular burner has been turned on, the level of heat can never be regulated. It reaches the highest heat mode and remains in this setting all through. The prospect of not being able to adjust the heat while cooking can be an awful experience especially when cooking any food that requires simmer mode. Again, besides producing different levels of heat, your stove could also fail to either turn on or off completely, regardless of the current setting. All support technicians agree that this particular problem occurs when the infinite switch connected to the dial which controls the power levels is faulty. The ultimate solution to this problem is replacing the damaged infinite switch. Before you decide to purchase the part, it is a magnificent idea to turn off the switches and examine the faulty burner with extreme care.

Your electric burner can’t heat.

For you to successfully diagnose this kind of problem, you’ll first have to clarify if your stove is limited to one or all of the burners. If the problem is with one particular burner, then you should check the heating coil as well as the connection. Turn off your electric stove and inspect the heating coil. As a safety precaution, your coil should cool entirely before you lay your bare hands on it. Well, you can now unplug it from the connection and look for visible signs of damage such as bubbles, cracks or even blisters. If the coil is okay, conduct a controlled test by changing it with another coil particularly of the same size and test both of them at once. This will allow you to determine if the problem is with the coil or your connection.electric stove troubleshooting

If you realise that the problem is with all the burners, then ultimately the conclusion should be that a larger electrical issue is to blame. This implies that you’ll have to seek the help of a qualified electrical contractor Melbourne.

Your electric stove cannot produce light.

This is also a common problem homeowners experience with their stoves. When you turn on your power source and your stove repeatedly clicks when the dial is set to light, but there is no flame, then you will smell the gas. This means that your ignition switch is defective. On the other hand, if you cannot smell any gas, then probably there is a gas leak somewhere.

Your stove has loose coils.

As time goes, the electric stoves normally become worn out. As such, cracks, blisters or bubbles become visible especially on stoves that are used on a daily basis. If your burner is showing clear signs of normal tear and wear, you’ll be forced to replace it. This is because damaged or worn out burners are never repaired.

Loose coils typically happen when you regularly use large pans and pots on your burner. Gradually, your coils lose their connection with the terminals thus becoming free. As a result, the coil is most likely to fail to heat. This is a warning that you must always use the recommended size of the cooking vessel on every coil on your electric stove. It ensures that the burners remain firmly fitted.

There could be other problems with your electric stove, but perhaps the ones discussed above are the most common. If you are unable to conduct the repair on your own, then you should contact your local home appliance electrician Brighton for the assistance.

Comprehensive Resource of Valuable Home Electrical Safety Tips

Electricity is part of your everyday life from the second you wake up. Although it brings about numerous benefits, it is not easy to ignore the dangers that it can pose. Multiple fires break out because of electrical faults, something that can lead to severe injuries or even death.

It implies that you have to be careful when handling electricity to stay out of harm’s way. Here is a comprehensive list of some home electrical safety tips that you can work with.

Essential Safety For Appliances

  •      Only purchase approved appliances by trustworthy consumer laboratories. Be sure to follow the safety advice and warnings that come with the product.
  •      All appliances not in use should not be plugged in.
  •      Put away any cords that are not in use. They should be inaccessible to pets and children.
  •      Do not cover any warm appliances with toys, clothes, or any other items.
  •      Turn off appliances if they overheat so that they can cool off.
  •      Never touch appliances with wet hands
  •      Do not poke things into appliances with openings such as outlets or toasters.
  •      Turn off power before plugging or unplugging appliances
  •      Keep exhaust fans clean at all times

In The kitchen

The set of rules in regards to home electrical safety that you should follow in your cooking space include:

  •      Clean hot plates, ovens, and filters regularly to avoid dirt build up
  •      Use an exhaust fan or ventilation system to eliminate fumes
  •      Do not leave appliances turned on unattended as you go about other businesses around the            house.

In The bathroom

  •      Avoid using power and extension leads in wet places
  •      Always switch off and unplug appliances you are not using such as styling irons, hair dryers, electric razors, etc.
  •      Discard and replace any appliance that has been immersed in water.

Exercise Caution With Cords

  •      Never use any cables that have splits, kinks or cracks.
  •      Firmly plug in the wires and ensure you only use them for their particular purpose. ( Nails or staples should not keep the cords in place).
  •      Do not try and attempt to modify the cords.
  •      Never let cables and electric wires meander under carpets.

Taking  Care of Outlets

  •      Remember to block any outlets that are not in use with childproof caps or solid cover plate.
  •      Use secure and robust plates to encase all outlets.
  •      Never overload the outlets. Instead, you should relocate the cords.
  •      Only the appropriate size of plugs should be in the outlet
  •      In the case of potentially dangerous scenarios like kitchens, pools, bathrooms and unfinished rooms use ground fault circuit interrupters should always.

Safety Tweaks with Bulbs

Bulbs are not left out of the home electrical safety tips and some of the information you should be aware of include:

  •      Only use bulbs with the  correct wattage if you do not want overheating issues
  •      Screw in all the bulbs tightly as loose ones can cause sparks and shorts
  •      Switch off or unplug lights before replacing a bulb.
  •      Switch to CFL (compact fluorescent bulbs) as they are not only safer for the environment and your wallet, they also offer the same level of light at a lower voltage.

It should always be a wise choice to have a professional electrical specialist to audit and solve your home electrical safety issues. Contact Quick Spark today and get your customised quote!

What To Look For When Hiring An Electrical Contractor in Adelaide

As a homeowner, you’ll always experience some electrical issues. Electrical power outage to your business or home can be frustrating, inconvenient and above all, dangerous. The prospect of solving electrical problems and conducting electrical repairs can be a dangerous adventure, especially if you do not know what you are dealing with. This implies that any electrical issue should only be solved or examined by a qualified, reputable and an experienced electrical contractor.

Currently, there are many electrical contractors in Adelaide. With that in mind, the prospect of finding the best electrical technician can sometimes be an intimidating and a daunting task. So today in this particular post, we want to discuss in excruciating detail, the key things you should always keep in mind before hiring an individual electrician.

 

The Certifications

You must always feel free to ask an electrical contractor about their certifications. If they are not in a position to answer the questions accordingly, then probably they aren’t the right contractor for the job. There are different levels of electrical training which an electrician must undergo before being awarded the certifications. They start out as an electrician apprentice and working under the direct supervision of a journeyman. At this level, both are under the overall monitoring of a master electrician. If you didn’t know, a master electrician boasts of the highest level of certification. They are more experienced than either a journeyman or an apprentice. To be more precise, a licence manifests verified experience as well as the examination requirements of a particular contractor.

 

Insurance and the bond details

Hiring an insured electrical contractor for your property projects to come with lots of benefits. Without proper and adequate insurance coverage, you could be responsible for any damages a contractor might cause, including an electrical fire and other related accidents. Damage to individuals or property to contractor negligence might be covered by this particular policy. Again, you should know that under certain circumstances you could be held liable for personal injury if the contractor is not insured.

On the other hand, a bonded electrical contractor in Adelaide has a work permit which is an assurance that your project meets the safety and construction codes. This also ensures that the work is conducted in a proper manner. What’s more, as a homeowner, you also get access to the recovery fund if the contractor abandons the project, or dies, or against any gross negligence by the electrician.

 

Experience is critical

Electricity is extremely hazardous to work around, typically if you haven’t trained to work safely in it. Moreover, any job done by an inexperienced contractor is itself a safety risk to your property. The longer an electrician has been on the job, and the more education he continues to gather, the more likely he will know the ins and outs of every electrical system. This implies that you should often opt for an electrician with vast expertise and knowledge.

 

References

A good and a reputable electrical contractor in Adelaide should always be willing to provide you with reliable and concrete recommendations if you ask for them. Any particular hesitation regarding the requested references should be a warning sign to you. References should give an idea of how that particular electrician has been conducting his duties.

 

Communication

It is essential for the electrical technician you hire to possess excellent communication skills. In fact, the contractor must be courteous, friendly, interested in solving your problem and should as well be willing to listen to your needs, preferences and concerns. Also, the contractor must be upfront about the costs and provide you with an estimate of how long the project will last.

 

Warranty

On most occasions, solving your electrical need would mean replacing certain components of your electrical system. If the contractor is the one providing such replacement parts, they should as well offer a warranty. Inquire from them if the warranty covers labour, parts or both plus the duration of the coverage.

 

The contractor should be up to date with the latest National Electrical Code

Did you know that the National Electrical Code sets the standards for electrical work in your state? Again, these standards are regularly updated after every three years in most states. As a result, a good electrician will be up to date with the most current edition.

Would you resolve to handle your electrical problems on your own? No, you would most probably hire an electrical contractor. As with most issues in your house, electrical work is best left to qualified technicians. Do It Yourself projects are not bad since they are cost effective. However, when it comes to electrical equipment on your property, you should always hire a contractor. We have given you what you should look for before hiring one.

Tips to Keep Your Heating System Clean

The reason why you got a heating system installed in your home or business premise was to be able to control temperatures. Controlling temperature is a valuable resource that makes a world of difference when weather conditions remain unpredictable.

Chances are you spent quite a bit of money to get the heater installed. So it only makes sense to protect your investment by keeping your heating system clean.

Here are tips on how you can maintain and keep your heating system clean.

Prevent Corrosion

Cleaning the heating system every so often helps in preventing corrosion.

The oil tank metal is susceptible to oxidisation brought about by water condensation. The condensation contributes to accelerated damage and accumulation of sludge.If you keep your heating system clean, it will lessen the corrosion damage.

Another alternative is to replace underground storage tanks with above ground sheltered tanks.

Monitor the Storage Tank’s Legs

A storage shell is exposed to elements, whether or not it is adequately sheltered, and this could cause corrosion.

It is important to keep an eye on the tank’s legs, which often receive the blow of corrosion and because they bear the weight of the tank it could be disastrous.

The weight they have to bear should be as per manufacturer recommendation. Otherwise, they may tilt under pressure and crack.

Check for Leaks

One of the other important aspects of maintaining your heating system is to regularly check all its elements for leaks.

Oil leaks may occur at any point of the heating system including the tank, delivery line, pipes, fittings or valves. It is vital to keep your heating system clean by cleaning leakage areas as well as sealing them with foil tape.

When oil leaks are over ten gallons, get immediate help from a professional.

Clean the Burner

The burner is yet another important part of the heating system and should be kept clean to maintain its heating dependability.

The burner can get carbon as well as other residue encrusting which may prevent it from lighting to full brilliance. Residue buildup also causes uneven heating which affecting the system’s heating abilities.

Cleaning up the burner regularly will keep it working as expected as well as reduce fuel cost.

Increase your Heater’s Efficiency

There is always room for improvement when it comes to heating systems. Constantly look out for new models of parts that might help to save on repair costs.

Protected fuel delivery lines are amongst the popular upgrade options because the protective sleeve they come with help with leak prevention. Safety valves also help with increasing your heating system’s efficiency.

Get a professional to check your heating system once in awhile to make sure that everything is running as it should. A professional can also keep your heating system clean by performing scheduled cleaning.

In summary, you can save on cost and increase efficiency by keeping your heating system clean. Making simple upgrades to your heating system could also help you save on costly repairs and lower your overall heating costs.

What To Do If Your Air Conditioner Smells Bad

A reliable air conditioner is an unbeatable source of relief and comfort during the scorching summer months. Every homeowner knows an efficient air conditioning system that runs smoothly is instrumental in making a house a comfortable home for its occupants during the hottest season of the year.

But when a problem with your air conditioner arises, it can be a real headache that will most likely require some serious DIY or, in worst scenarios, the help of a professional. As a homeowner, one of the more common problems you probably encounter (particularly during the summer) does not know what to do if your air conditioner smells bad.

There are several causes why your air conditioner is emitting a foul odour, or what is sometimes called the “Dirty Sock Syndrome”. The information below can help you determine what to do if your air conditioner smells bad and how to prevent it in the future.

What Causes “Dirty Stock Syndrome”?

There are two common causes of the foul odour emitted by air conditioners:

  1. Mould or Mildew Growth on Your Air Conditioner’s Evaporator Coils

Besides the foul-smelling odour, if you notice that your air conditioner is releasing weaker airflow than usual, there might be a buildup of mould, mildew, or bacteria in your unit’s evaporator coils.

The growth of mould, mildew and other bacteria takes place when condensation happens in the evaporator coils due to the warm air that passes through them. The dust and dirt that can be found within the coils then transform into breeding grounds for fungus and bacteria that can emit a foul smell.

Other indications that your evaporator coil is dirty and clogged include the formation of ice on the coils and the visible buildup of mould or mildew.

What to Do if Your Air Conditioner Smells Bad Due to Mould and Mildew

You’ll need to hire an air conditioning repair professional to clean out your evaporator coils, as this will require disassembly of certain parts of your air conditioner.

If you feel confident in disassembling your air conditioner yourself, you can clean its evaporator coils by removing any visible debris, dirt and moisture with a rag and using a vacuum. Afterwards, use a spray coil cleaner (be sure to follow the direction on the label before use) to ensure any remaining mould and mildew are thoroughly removed.

  1. Bacteria and Mould Growth on Your Air Conditioner’s Condensate Line

A clogged condensate line means the stagnant water provides the ideal conditions for mould and bacteria growth. Some indications of a clogged condensate line include water leaking out of the indoor unit and your air conditioner turning off on its own. The latter is due to a built-in safety switch that automatically shuts off the unit when there is a problem.

What to do if Your Air Conditioner Smells Bad Due to Mold and Bacteria Growth in a Clogged Condensate Line

You can easily unclog your air conditioner’s condensate line by locating the main drain of your unit and using a vacuum to clean it out. Otherwise, schedule a clean-up with an air conditioner technician.

Why Your Home Air Conditioning Service Technicians Suggest a Thermostat Upgrade

You are mistaken if you think you save money using the same thermostat installed in your home 20 years ago. On the contrary, home air conditioning service technician may suggest upgrading your thermostat if you find your air conditioner is not cooling as efficiently as it should.

This is because new and upgraded thermostats have added features which help improve the thermostat’s working and efficiency. Its energy saving settings help reduce your electricity bills while maintaining your ideal temperature.

Moreover, new thermostats help create customised settings which you can adjust as per your schedule and can also be adjusted to receive sufficient airflow to help maintain a consistent temperature. In other words, new thermostats give a much better user experience than its older counterparts.

Reduce your energy consumption

Home air conditioning service technicians suggest a thermostat upgrade not only for an improved user experience but also because it’s programmable settings and sensitive sensors reduce your energy expenditure. So in the long run, you may end up saving as much as 10% on your energy bills with your new thermostat.

Another interesting reason for upgrading thermostats is its flexibility. By flexibility, it means that the thermostat will automatically manage its settings so that it maintains optimal comfort in your home or office throughout the day. This reduces your time and effort spent manually controlling the thermostat.

Help reduce environmental footprint

It’s a known fact that upgraded thermostats consume less energy. So if you are environmentally conscious, and want to do your bit at sustaining the environment, upgrading your thermostat helps you make your contribution to the environment. An upgraded thermostat keeps responding to the natural temperature and user fluctuations throughout the day.

Increased convenience in thermostat access

Another reason for your home air conditioning service technician to suggest a thermostat upgrade is the varied types of thermostats available in the market today. You can choose between a simple programmable model to smart thermostats which fit your needs. The modern Internet of things (IoT) thermostats gives you remote access and control to your thermostats via the internet, from anywhere you are, anytime you want.

So if you forget to switch off the system in the hurry to head to work, you can log in via your Smartphone and make the necessary adjustments. Or you can switch on the thermostat while driving home from the airport so that your home becomes cool and comfortable when you reach it.

Help you to adapt to future technological advances

A thermostat upgrade helps make it easy for you to adapt to the many future technological advances prevalent today in the society like the concept of connected living in the house.

Switching to a smart thermostat

There are modernised thermostats in the market which are designed with more accuracy and user-friendliness than its older counterparts. These smart thermostats are relatively small investments which give great rewards.

Besides being user-friendly and just right for your indoor space, these upgraded thermostats help you keep track of all your heating and air patterns for a more comfortable cooling experience.

So if you ever wondered why your home air conditioning service technician suggests a thermostat upgrade because of your AC’s reduced cooling efficiency, now you know why!

The Main Benefits of Ducted Air Conditioning

Weather fluctuations make many want to install an air conditioning system to cool their entire home and of the many AC systems around, ducted air conditioning Sydney is worth a try. This ducted system comprises of an indoor and outdoor unit connected through flexible ducting.

This air conditioning system can either be installed in a new home or tailored to suit an existing one. Once installed, only its controller, discharge grills and return air are visible in your home. This is because the indoor unit is concealed in the ceiling or under the floor while the outdoor unit is discreetly located outside the house.

If you now wonder why you should invest in a ducted air conditioning system, you will be able to make a better decision after learning about its many benefits.

  • Ducted air conditioning systems help create a favourable and relaxed environment by air conditioning all the rooms in your house through the year.
  • You can easily set the central temperature and zone control using timers. If your baby is sleeping in a room, and you are worried about the AC getting too cold for her, you can also adjust the temperature from wherever you are, without entering her room and risk waking her up.
  • Moreover the unit has a maximum of 6 individual air conditioned zones to provide the needed flexibility and economy of cooling your home without wasting electricity. You can thus program it to keep the living room cool during the day, and bedrooms at night.
  • Ducted air conditioning Sydney is aesthetically pleasing as only its grills are visible. The ducted system does not in any way intrude your room’s look like wall hung units do.

  • As these AC units offer even air distribution, you are assured there are no cold or hot spots in your home. Moreover, there is a wide variety of these AC units to choose from ranging from 7 to 27 kW cooling capacity, so there is something for every home!
  • Another reason you’ll love these AC units is because it is a very quiet air conditioning option as only one unit runs and makes noise. On the contrary, a split system gets very noisy with so many outdoor units working. Even if you look at things cost wise, it’s cheaper installing ducted air conditioning Sydney systems than installing a wall hung split system in all rooms.
  • Did you know that adding ducted air condition to your home also increased your home’s overall sale value? So it’s an investment well made, as you have nothing to repent about in the future, if and when you have to sell your house as your air conditioning system will fetch you a better price than expected.
  • Moreover, ducted air conditioning Sydney is cheaper to maintain as only one system has to be serviced and maintained per visit.

 

The Top 4 Tips That You Can Do To Maintain A Good Quality Of Home

The home is where we live together with our loved ones. We should always take care of it because it is the sanctuary that shelters us all. Maintaining our homes is a must. Here are the top tips that you can do to keep a good quality of home despite how many years may pass.

1. Garage door test

The carport door is one of the most neglected things in our home because it is not used as regularly as our front doors. Even if that is the case, it should be checked at least once a month to make sure that it is still working properly.

2. Test GFCI

The GFCI should be tested on a monthly basis because it will make sure that your homes are always safe from any short circuit that may occur. Do not just use the button but make sure to use a voltage tester as well.

3. Fireplace

It is not something that you need to do every month, but you have to make sure that you can at least inspect and have the chimneys cleaned up once a year. It can store a lot of dirt and dust that can be harmful to the health of your family.

4. Smoke detectors

Be on the safe side when it comes to your homes. You might have installed smoke detectors, but that should not be the end of it. Make sure to check and replace its batteries yearly to ensure that it is always up and running. You wouldn’t know when you will need it, so it is always better to be prepared.

If you can do all these four tips, you are guaranteed to have a well-maintained home. The safety and wellness of your family who lives at home should always be our priority.

Myth About Local Air Condationers Repair Worth Knowing

As a DIY person, you tend to look out for different tips and techniques you can use to improve the performance of your air conditioning system. In the midst of acquiring this information, there is always a chance of your learning a few myths about local air conditioner repairs which you should be aware of.

Myth no.1: There’s no need to learn all about the HVAC contractor.

False. You need to do your research before hiring an air conditioning service company to ensure you don’t end up paying for the same service twice. It is today easy for any company, no matter how experienced or capable they are at their work to place ads for their services online as some domains don’t even require a company. Hiring these people for local air conditioner repairs may end up with their doing more harm than good to your AC unit!

So check a few online reviews, get some referrals from friends and dealing only with companies having a high accreditation grade with the BBB assure you are dealing with a safe company. Be wary of web pages like Craigslist which lets anyone post ads about their services without checking their qualifications, licensing, bonds or even background.

Hiring a contractor for your local air conditioner repairs without checking their qualifications and capabilities may end up with you having to hire another company to correct the mistakes made and thus pay multiple service charges.

Never refrain from asking about a company’s past customer references to find out how qualified the technicians are. This helps you save lots of money on your AC repairs.

Myth no.2: There is no difference where the thermostat is installed.

False. Readings on a thermostat depend on its surrounding temperatures and accordingly activates the AC to cool down the house. So if the thermostat is fit in your bedroom, it ensures that the temperature in the bedroom is lowered to the temperature set on the thermostat. The AC thus shuts off when the bedroom has cooled down while the remaining home or floor may be much warmer.

So if the thermostat is placed near the window or an appliance you constantly use, it ends up giving a higher reading than the living area. Your air conditioner thus ends up continuously working which ends up increasing your energy bills and lead to some probable air conditioning repairs.

Myth no.3: You get better cooling effects by closing vents in the unused parts of the house.

While this was once true, it today can be a reason for more local air conditioner repairs. The present high-performance air conditioning systems work at maintaining a delicate balance for the optimal cooling of your home. By closing off some parts of your house, you only end up upsetting the balance in your home.

In the process, your air conditioning system ends up working harder to compensate for the upset balance. Moreover, as AC systems have a convenient dehumidifying effect, closing off some parts of your home can eventually lead to moisture problems.

Now you know the truth about these 3 myths, you know what you should do, and who you can trust and rely on the next time you have some local air conditioner repairs to be taken care of!

The 4 Home Maintenance That You Need to Know to Lower Your Utility Bills

We all know that there are a lot of families that need to pay the high costs of utility bills like water and electric bills. Here’s good news for every homeowner out there. Check out these home maintenance tips that you need to know to ensure a lower amount of utility bills.

1. Reduce the temperature on the water heater

It is important just to set the water heater on moderate. The higher you adjust the temperature of the water heater means more energy will be consumed for your electric bills. Aside from that, it can also extend the life of your heater because high heat will not overpower it.

2.    Replace air filters

You need to make sure that the air filters are replaced regularly. If you do not do so, neglected air filters can consume a lot of energy because the unit you have will work extra hard to give you the kind of temperature you want.

3.    Check for leaks

If you have noticed, that your water charges are going up without making any difference at your home, it is time for you inspect your pipes and check for any leaks. If there will be any, your bills on the water bill won’t just go up, but you are also wasting precious water.

4. Energy efficient light bulbs

Our generation these days have been very advanced. There is no need for us to waste a lot of energy and pay a lot of bills with the bulbs that we use. Buy the light bulbs that will only consume an appropriate amount of energy and have it installed in your home. There is nothing to fret about because it is not expensive.

If you can follow these electrical tips, you will be surprised to see how much of a difference it can make on your high bills.

Save